How To Install the K-Drill Auger Extension

The standard K-Drill can auger through up to 36” of ice. So when things get a bit more challenging than that, an extension can be added for ice conditions beyond three feet. The extensions can also be “stacked” if needed to create a very long ice auger.

1. Slide the K-Drill’s float down, exposing the Allen bolt.
2. Remove the bolt and remove the drive stem and washer.
3. Install the stem of extension into the open shaft of the K-Drill, securing extension to K-Drill.
4. Replace and tighten the bolt removed in step #2.
5. Install the drive stem with washer into the top of extension.
6. Secure it with the new bolt provided.

You will notice that the extension also has a float attached. This is to account for the added weight. Do not remove this second float.

Buy Here